RAYZEEK PIR Motion Sensor Light Switch,No Neutral No Ground Wire

About This

• ImportantNo Neutral or Ground wire required. Use a 3W or higher light to avoid flickering. This Motion Sensor Light Switch is perfect for old houses with only two wires (Hot and Load). Single Pole Indoor Use Only, Not compatible with 3‑way circuits.
• Versatile 3-In-1 Sensor ModeRayzeek RZ020 motion sensor switch is the ultimate solution for automating your home lighting. It can act as an Occupancy Sensor(auto on & auto off), Vacancy Sensor(manual on & auto off), and manual ON/OFF. Simply upgrade all your light switches with RZ020 to suit the diverse needs of every space
• Quick and Accurate SettingNo need to take off the wallplate with a screwdriver, Only press button to get exact value. After connecting the switch, the default in Occupancy with light sensor mode, time-delay is 1min (15s-30s-1min-3min-5min-10min-30min adjustable), ambient light sensor value is Default 25Lux (Off-15Lux-25Lux-35Lux optional), high sensitivity (Default) or low sensitivity optional.
• Capacity and SpecificationsFCC listed, 120VAC, 50/60Hz, Resistive/Standard Ballast/Electronic Ballast/Tungsten/LED: 5.0A, Motor 1/6HP. For Control of Electronic Ballast, CFLs, LED, and LED Lamps,Wall Plate Included. Please make sure that the light is at least 3W or higher, otherwise it might flicker.

Overview

• Operation Mode : Occupancy Mode: Auto on-Auto off Vacancy Mode: Manual on-Auto off ON/OFF Mode: Manual on-Manual off
• Current Rating : 5 A
• Operating Voltage : 120 volts_of_alternating_current
• Contact Type : Normally Open
• Connector Type : Screw
• Brand : RAYZEEK
• Switch Type : Push Button
• Terminal : Screw
• Material : V0 fire-resistant materials
• Circuit Type : 1-way
• Use a 3W or higher light to avoid flickering.
• Automatically turns on lights when you enter a room—perfect for spaces like entryways (carrying groceries) or laundry rooms (with a full basket).
• Works seamlessly in homes or offices, eliminating manual switches when your hands are occupied.
• Occupancy with light sensor : Auto ON-Auto OFF (after time delay).
• Occupancy without light sensor : Auto ON and Auto OFF day and night.
• Light sensor in this mode feature can meet your need,give you more choices.
• Short-press big button : turn on/off the load temporarily (reverts to last mode after delay).
• Short-press small button : Activates manual ON/OFF mode (press big button to escape this mode).
• Just need to press button to get exact value (Time Delay, Detection Sensitivity, Light sensor and Mode Setting)
• Occupancy with light sensor
• Occupancy without light sensor
• Short-press big button
• Short-press small button
• 4.5 out of 5 stars