PIBIDI Antenna Mount J-Pipe 1.25x16.5in for Antenna, Weather Station

About This

• Antenna And Weather Station Mount: A versatile outer diameter 1-1/4" mast pole for outdoor TV antennas, weather stations, 4G/5G antennas, WiFi equipment, satellite antennas and cell phone signal boosters.
• 16.5-Inch Extended Reach: The 16.5" arm helps raise mounted equipment above the roofline and extend it beyond eaves or nearby obstacles. The reversible pole configuration provides flexible vertical height and horizontal clearance. Add a 16.5" extension pole, sold separately, for extra height or clearance when needed.
• Heavy-Duty Steel Construction: Built with a 1.5 mm steel mast and 2 mm mounting bracket for dependable support. The powder-coated, corrosion-resistant finish is designed for long-term outdoor use.
• 180° Adjustable J-Mount: Rotate the pole up to 180° to suit walls, eaves, roofs and other flat or sloped surfaces. The locking-pin bracket provides two fixing positions for a more secure installation.
• Complete Mounting Hardware: Includes ST8 x 50 mm stainless steel self-tapping screws, plastic anchors, and a screw sleeve wrench to simplify installation and reinforce the mast.

Overview

• Antenna : Television, Weather Stations, Starlink, Satellite, Radio, WiFi, Cell Phone Signal Boosters
• Brand : pibidi
• Color : Length 16 1/2"
• Item Highlight : Heavy-Duty 1.5mm Steel Mast, 2mm Bracket, Reversible 180° Pivot Lock fit Wall/Eave/Roof, Hardware Included, Powder-Coated See more
• Number of Items : 1
• UHD-8903 outdoor HDTV antenna is designed to receive digital TV UHF/VHF signals while providing high quality HDTV picture. You can enjoy high definition television without the high cost of cable or satellite.
• Specifications
• Working Frequency: VHF 170~230MHz | UHF 470~790MHz
• Typical Antenna Gain: VHF-6-8dB | UHF: 9-15dB
• Impedance: 75Ohm
• Operation Temperature: -10° C ~ 50° C
• 1, Clamp a#10 copper or #8 aluminum grounding wire to the base of the antenna mast. Using stand-offs every 1.2m to 1.8m /4 to 6 feet, run the wire down the building in as straight a line as possible.
• 2, Attach a 300-Ohm static discharge unit (lightning arrestor) or a 75-Ohm grounding block to the antenna’s lead-in cable as close as possible to the point where the cable enters the house.
• 3, Attach the grounding wire to the lead-in cable’s grounding unit and run the wire to the central building ground.
• Acceptable central building ground points may include
• Grounded interior metal cold water pipe within 1.5m/ 5 feet of the point where it enters the building Grounded metallic service raceway
• Grounded electrical service equipment enclosure
• 2.4m / 8foot grounding rod driven into the ground (only if bonded to the central building ground by #6 or heavier bonding wire)
• Other acceptable electrodes that comply with the sections 250 and 810 of the National Electrical Code (NEC)
• Note: TV signal reception is immensely affected by the conditions such as antenna height, terrain, distance from broadcasting transmission antenna and output power of transmitter. Channels you can watch may vary depending on these conditions.
• The HDTV reception ensures that you always have the highest quality content.