OFFLINE CLONER, NO COMPUTER NEEDED: Copy one SATA drive to another at the press of a button, up to 60MBps, with the dock unplugged from any PC. Target drive must be the same size as the source or larger.
READS AND WRITES TWO DRIVES AT ONCE: Both bays mount as separate drives when connected to a computer over USB, so you can move files between them or work off both. Hot-swappable, tool-free, with an HDD access LED per bay.
SATA ONLY, 2.5in AND 3.5in: Fits bare 2.5in and 3.5in SATA hard drives and SATA SSDs. It does NOT support IDE/PATA drives, drives with a 4-pin Molex power connector, M.2 or NVMe drives, and drives are not included.
WHAT COMES IN THE BOX: Docking station, power adapter and a USB Type-C cable. The cable is USB-C on the dock end - check your computer has a USB-C port or add your own USB-C to USB-A cable before you order.
USB 3.0 SPEEDS UP TO 5GBPS: Plug and play on Windows and Mac with no drivers to install. Real-world speed is set by the drives you fit - a mechanical hard drive will not reach 5Gbps, and offline cloning runs up to 60MBps by design.
