{"product_id":"b0clcrf1qs-2pcs-bme280-3-3v-sensor-module-pre-soldered-high-p","title":"2PCS BME280 3.3V Sensor Module Pre-Soldered High Precision Atmospheric Pressure Sensor GY-BME280-3.3 Temperature Humidity Sensor Module for Raspberry Pi and Other MicroControllers","description":"\u003ch2\u003eAbout This\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe BME280 is the next-generation of sensors, and is the upgrade to the BMP085\/BMP180\/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications, but can use either I2C or SPI.\u003c\/li\u003e\n\u003cli\u003ePre-soldered BME280 Sensor Module: Solderless! Pins already attached. Ready to plug in and go.\u003c\/li\u003e\n\u003cli\u003eBME280, the precision sensor from , is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface\u003c\/li\u003e\n\u003cli\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V; Pressure: 300-1100 hPa; Temperature: -40 to +85°C ; Humidity: 0-100%; Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz)\u003c\/li\u003e\n\u003cli\u003eBME280 3.3V Sensor Module: High resolution and low noise, with quick response times, can be used for altitude measurements, weather monitoring, or even gaming!\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEven better, this product is ready to be plugged in since it already has soldered pins. Saving time and avoiding danger.\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003ePackage Included: 2pcs BME280 3.3V Atmospheric Pressure Sensor Module\u003c\/li\u003e\n\u003cli\u003eBME280 is a Temperature, Humidity \u0026amp; Pressure Sensor breakout board.\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003cli\u003eInterface: I2C and SPI\u003c\/li\u003e\n\u003cli\u003eSupply Voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eMeasurements: Temperature, Pressure, Humidity. Pressure can be converted to altitude.\u003c\/li\u003e\n\u003cli\u003eCompatibility: All Raspberry Pi and any microcontroller with I2C or SPI capabilities.\u003c\/li\u003e\n\u003cli\u003eSoldering: Comes Pre-Soldered.\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -40 - 85 °C\u003c\/li\u003e\n\u003cli\u003ePressure Range: 300 - 1100 hPa\u003c\/li\u003e\n\u003cli\u003eHumidity Range: 0 - 100 %\u003c\/li\u003e\n\u003cli\u003eHumidity Response Time: 1 s\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption:~3.6 μA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AITIAO","offers":[{"title":"Default Title","offer_id":50512710598904,"sku":"B0CLCRF1QS","price":32.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/9091\/1224\/files\/61x27p432kL._SL1500.jpg?v=1789431139","url":"https:\/\/vol-tive.com\/products\/b0clcrf1qs-2pcs-bme280-3-3v-sensor-module-pre-soldered-high-p","provider":"vol-tive","version":"1.0","type":"link"}